Function Group Information - Endress+Hauser Proline Promag 55 Operating Manual

Device Functions Proline Promag 55 FOUNDATION Fieldbus
Endress+Hauser
7.1.3

Function group INFORMATION

⇒
BASIC FUNCTION G
BASIC FUNCTION
MANUFACTURER ID Use this function to view the manufacturer ID in decimal numerical format.
(6240)
User interface:
452B48 (hex) for Endress+Hauser
DEVICE TYPE Use this function to view the device ID in hexadecimal numerical format.
(6241)
User interface:
1042 (hex) for Promag 55 FOUNDATION Fieldbus
SERIAL NUMBER Use this function to view the serial number.
(6242)
User interface:
11-digit number
DEVICE REVISION Use this function to view the device revision number.
(6243)
!
The information displayed here can be used to ensure that the correct system files
(DD = Device Description) are used for integration into the host system. The system files
can be downloaded free of charge from the Internet at www.endress.com.
Example:
Information displayed in the DEVICE REVISION function (6243)
Information displayed in the DD REVISION function (6244)
required device description files (DD)
DD REVISION Use this function to view the revision number of the device description.
(6244)
!
The information displayed here can be used to ensure that the correct system files
(DD = Device Description) are used for integration into the host system. The system files
can be downloaded free of charge from the Internet at www.endress.com.
Example:
Information displayed in the DEVICE REVISION function (6243)
Information displayed in the DD REVISION function (6244)
required device description files (DD)
FOUNDATION FIELDBUS GGA
Function description
→
FOUNDATION FIELDBUS
Note!
→
Note!
→
7 Block BASIC FUNCTION
⇒
CONFIGURATION
⇓
FUNCTION BLOCKS
⇓
INFORMATION
→
INFORMATION
→
03
→
01
0301.sym / 0301.ffo
→
03
→
01
0301.sym / 0301.ffo
620
6122
624
43