Replacing The Air Filter - Waters Xevo TQD Operator's, Overview And Maintenance Manual

• Desolvation gas seal
Requirement:
groove as shown.
4. Fit the following new seals to the probe adjuster assembly:
• Probe seal
• Nebulizer gas seal
5. Refit the source enclosure to the instrument (see

Replacing the air filter

You must replace the air filter annually.
Required material
New air filter
To replace the air filter:
1. Lift the instrument's visor so that the source probe is fully exposed.
2. Fully open the source enclosure.
These seals have a special cross-section; fit them in the
Seal
Groove
page 4-11).
Replacing the air filter 4-95