B
External Connections
This appendix describes the instrument's external connections.
Contents:
Topic
External wiring and vacuum connections
Connecting the oil-filled roughing pump
Connecting the Edwards oil-free roughing pump
Connecting to the nitrogen gas supply
Connecting to the collision cell gas supply
Connecting the nitrogen exhaust line
Connecting the liquid waste line
Connecting the workstation
Connecting Ethernet cables
I/O signal connectors
Connecting to the power supply
The instrument is heavy. To avoid injury, use suitable
Warning:
machinery and the supplied harness to lift it.
Caution:
• Contact Waters Technical Service before moving the
instrument.
• If you must transport the instrument, or remove it from service,
contact Waters Technical Service for recommended cleaning,
flushing, and packaging procedures.
See
page
4-7.
Page
B-2
B-3
B-8
B-12
B-14
B-14
B-17
B-19
B-19
B-20
B-25
B-1