Web Server Type - Yealink SIP-T2 Series Administrator's Manual

Administrator's Guide for SIP-T2 Series/T19(P) E2/T4 Series/T5 Series IP Phones
Select Disabled from the pull-down list of PC Port Active.
2.
Click Confirm to accept the change.
3.
A dialog box pops up to prompt that the settings will take effect after a reboot.
Click OK to reboot the phone.
4.

Web Server Type

Users can configure the user or administrator features of the phone via web user interface. Web
server type determines access protocol of the IP phone's web user interface. IP phones support
both HTTP and HTTPS protocols for accessing the web user interface. This can be disabled when
it is not needed or when it poses a security threat. For more information on accessing the web
user interface, refer to
HTTP is an application protocol that runs on top of the TCP/IP suite of protocols. HTTPS is a web
protocol that encrypts and decrypts user page requests as well as pages returned by the web
server. Both HTTP and HTTPS port numbers are configurable.
When you enable user to access web user interface of the IP phone using the HTTP/HTTPS
protocol (take HTTPS protocol for example):
28
Web User Interface on page 98.