Display Method On Dialing - Yealink SIP-T2 Series Administrator's Manual

Description:
Configures the interval (in milliseconds) for the IP phone to horizontally scroll the caller
information when the phone is ringing.
Note: It is not applicable to CP860 IP phones.
Web User Interface:
None
Phone User Interface:
None
To configure call display features via web user interface:
Click on Settings->Call Display.
1.
Select the desired value from the pull-down list of Display Contact Photo.
2.
Select the desired value from the pull-down list of Display Called Party Information.
3.
Select the desired value from the pull-down list of Call Information Display Method.
4.
Click Confirm to accept the change.
5.

Display Method on Dialing

When the IP phone is on the pre-dialing or dialing screen, the account information will be
displayed on the top left corner of the LCD screen.
You can customize the account information to be displayed on the IP phone as required. IP
Parameters
Configuring Basic Features
Permitted Values Default
241