Call Display Configuration - Yealink SIP-T2 Series Administrator's Manual

Hide thumbs Also See for SIP-T2 Series:
Table of Contents

Advertisement

Call Display Configuration

The following table lists the parameters you can use to configure call display.
Parameter phone_setting.contact_photo_display.enable
It configures whether to display contact avatar when it receives an incoming call, dials an outgoing call or
engages in a call.
Description
Note: It is only applicable to T54S/T52S/T48S/T48G/T46S/T46G/T29G IP phones.
0-Never, do not display contact avatar no matter whether the contact avatar exists or not
Permitted
1-Always, display the customized contact avatar if it exists; display the built-in avatar if the customized
Values
contact avatar does not exist
2-Adaptive, display the customized contact avatar if it exists; otherwise do not display
Default
1
Web UI
Settings->Call Display->Contact Photo Display Mode
Parameter account.X.picture_info_enable
It enables or disables the IP phone to download the picture from the URL contained in the Call-Info or
Caller-Image Header of Invite message.
Description
Note: It is only applicable to T54S/T52S/T48S/T48G/T46S/T46G/T29G IP phones.
Permitted
0-Disabled
1-Enabled
Values
Default
0
Parameter phone_setting.called_party_info_display.enable
It enables or disables the IP phone to display the local identity when it receives an incoming call or during
a call.
Description
Note: The information display method is configured by the parameter "phone_setting.call_info_display_
method". To display the local identity during a call is not applicable to
T48G/T46G/T42G/T41P/T29G/T23P/T23G/T21(P) E2/T19(P) E2 IP phones.
Permitted
0-Disabled
1-Enabled
Values
Default
0
Web UI
Settings->Call Display->Display Called Party Information
Parameter phone_setting.call_info_display_method
It configures the call information display method when the IP phone receives an incoming call, dials an
Description
outgoing call or is during an active call.
0-Name+Number
1-Number+Name
Permitted
2-Name
Values
3-Number
4-Full Contact Info (display name<sip:xxx@domain.com>)
<y0000000000xx>.cfg
[1]
<MAC>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
Phone Customization
135

Advertisement

Table of Contents
loading

Table of Contents