Ringer Device; Ringer Device Configuration - Yealink SIP-T2 Series Administrator's Manual

10 or Splash.wav
Custom ring tone name (for example, Customring.wav)
l
Default 1
Web UI Settings->Ring->Internal Ringer File
[1]
X is the account ID. For T54S/T48S/T48G/T46S/T46G/T29G, X=1-16; for T52S/T42G/T42S, X=1-12; for T41P/T41S/T27G,
X=1-6; for T40P/T40G/T23P/T23G, X=1-3; for T21(P) E2, X=1-2; for T19(P) E2/CP920, X=1.
[2]
X is the ring tone ID. X=1-10.

Ringer Device

The IP phones support either or both speaker and headset ringer devices. You can configure which ringer device to be
used when receiving an incoming call. For example, if the ringer device is set to Headset, ring tone will be played
through your headset.
If the ringer device is set to Headset or Headset&Speaker, the headset (either a wired headset, Bluetooth headset or
USB headset) should be connected to the IP phone and the headset mode also should be activated in advance. The
USB headset is only applicable to T41S/T42S/T46S/T48S/T52S/T54S IP phones.
You can press the HEADSET key to activate the headset mode. For more information, refer to the
cific user guide.
It is not applicable to CP920 IP phones.
Topic

Ringer Device Configuration

Ringer Device Configuration
The following table lists the parameters you can use to configure ringer device.
Parameter features.ringer_device.is_use_headset
It configures the ringer device for the IP phone.
If the ringer device is set to Headset or Headset&Speaker, the headset should be connected to the IP
phone and the headset mode also should be activated in advance.
Description
Note: If you want to user speaker ringer device for the phone, you have to set "features.speaker_mod-
e.enable" to 1 (Enabled). If you want to user headset ringer device for the phone, you have to set "fea-
tures.headset_mode.enable" to 1 (Enabled). It is not applicable to CP920 IP phones.
Note: It is not applicable to CP920 IP phones.
0-Use Speaker
Permitted
1-Use Headset
Values
2-Use Headset & Speaker
Default 0
Web UI Features->Audio->Ringer Device for Headset
<y0000000000xx>.cfg
Audio Features
Yealink phone-spe-
341