Husqvarna Rider 316T/s AWD Workshop Manual page 86

10. Fasten the idler pulley spring.
11. Fit the front cover.
removing the Cutting Deck
(CombiClip 103, CombiClip 112)
WArNiNG! use protective goggles when
dismantling the cutting deck. The spring
keeping the belt under tension can break
and cause personal injury.
1. Follow Service Position for Cutting Deck,
points 1-6 to put the cutting deck into
service position.
2. Lower the cutting deck.
3. Raise the deck catch.
4. Pull out the cutting deck.
WArNiNG! Take care not to trap your hand.
86
English-
rEPAir iNSTruCTiONS
8042-514
8043-923
8042-238
8042-251