Husqvarna Rider 316Ts AWD Manuals

Table of Contents

• • 2

    Contents
  • 2

    Table of Contents

• 3

  Ser Vice Journal

  • 3

    Pre-Deliv Ery Service
  • 3

    After the First 8 Hours

• 4

  Intr Oduction

  • 4

    Dear Customer
  • 4

    Driving and Transport On Public Roads
  • 4

    Towing
  • 4

    Use
  • 4

    Good Service

• 5

  Key to Symbols

  • 5

    Symbols

• 7

  What Is What

  • 7

    What Is What On the Ride-On Mower

• 8

  Safety Instructions

  • 9

    Driving On Slopes
  • 10

    Children
  • 10

    Maintenance
  • 11

    Transport

• 12

  Presentation

  • 12

    Throttle Trigger
  • 12

    Choke Control
  • 12

    Speed Limiter
  • 12

    Parking Brake
  • 12

    Cutting Unit
  • 13

    Lifting Lever for the Cutting Unit
  • 13

    Cutting Height Adjustment Lever
  • 13

    Lights
  • 13

    Counter
  • 13

    Seat
  • 13

    Fueling
  • 14

    Release Lever

• 15

  Driving

  • 15

    Before Starting
  • 15

    Start the Engine
  • 16

    Starting the Engine With a Weak Battery
  • 16

    Driving the Rider
  • 17

    Cutting Tips
  • 17

    Stop the Engine

• 18

  Maintenance

  • 18

    Maintenance Schedule
  • 19

    Cleaning
  • 19

    Removing of the Machine Hoods
  • 19

    Checking and Adjusting the Steering Wires
  • 20

    Adjusting the Parking Brake Rider 316T
  • 20

    Adjusting the Parking Brake
  • 20

    Checking and Adjusting of Throttle Wire
  • 21

    Checking and Adjusting the Choke Wire
  • 21

    Replacement of Fuel Filter
  • 21

    Checking the Fuel Pump's Air Filter
  • 21

    Replacing the Air Filter
  • 22

    Ignition System
  • 22

    Check the Safety System
  • 22

    Replacing the Light Bulbs
  • 23

    Main Fuse
  • 23

    Checking the Tyre Pressure
  • 23

    Checking the Engine's Cooling Air Intake
  • 24

    Fitting the Cutting Head
  • 25

    Removing the Cutting Unit
  • 25

    Checking and Adjustment of the Cutting Unit's Ground Pressure
  • 25

    Checking the Cutting Unit's Parallelism
  • 26

    Adjusting the Parallelism of the Cutting Unit
  • 26

    Replacing the Cutting Unit Belts
  • 27

    Service Position for the Cutting Unit
  • 28

    Checking the Blades
  • 28

    Removing the Bioclip Plug

• 29

  Lubrication

  • 29

    Checking the Engine's Oil Level
  • 29

    Changing the Oil Filter
  • 30

    Checking the Transmission Oil Level
  • 30

    Lubricating the Belt Adjuster
  • 30

    General Lubrication

• 31

  Troubleshooting Schedule

• 32

  Storage

  • 32

    Winter Storage
  • 32

    Guard
  • 32

    Service

• 33

  Technical Data

  • 35

    Ec-Declar Ation of Conformity