Service Position For Cutting Deck - Husqvarna Rider 316T/s AWD Workshop Manual

7. Grip the front edge of the deck and pull it
forward until it stops.
8. Remove the screws holding the cutting
deck.

Service Position for Cutting Deck

In order to give good access for cleaning,
repair and service of the deck, it can be set to
service position. Service position means the
deck is tilted up and locked in vertical position.
Applying Service Position
(CombiClip 103, CombiClip 112)
1. Put the machine in a level position. Apply
the parking brake.
2. Put the cutting height control to its lowest
position and lift up the cutting deck.
rEPAir iNSTruCTiONS
8042-052
8042-118
804239024
89
English-