Husqvarna Rider 316T/s AWD Workshop Manual page 60

3. Drain the oil if necessary, two plugs.
4. Mark the hydraulic lines and loosen them
from under the rear axle. Fit protective
plugs. A small amount of oil may leak out
even if the axle has not been drained.
5. Loosen the return line from the hydraulic
tank. Open the clamp for the suction line
under the tank and remove the hydraulic
tank.
60
English-
rEPAir iNSTruCTiONS
Oil drain
Hydraulic hoses bottom
Opening a clamp
8009-832
8009-833
8009-834