Husqvarna Rider 316T/s AWD Workshop Manual page 19

DELiVEry AND DEALEr SErViCE
Maintenance
Check the engine valve
clearance .
4)
Check the fuel hose. Change if
necessary
Check the need for oil change
in the transmission
4, 5)
200 hrs).
Change filter in the
transmission (every 200 hrs).
4)
Change the air cleaner
precleaner (foamed plastic)
Change air filter (paper filter)
(every 200 hrs).
Carry out the 300-hour
service .
4)
1) First change after 8 hours. Change every 50 hours, Briggs & Stratton every 25 hours when driving under heavy loads or
in high ambient temperatures.
should be lubricated twice a week when used on a daily basis.
change after 8 hours.
l
= Described in this workshop manual.
m = Not described in this workshop manual or operator's manual.
t = Described in the operator's manual.
WArNiNG!
Service procedures must not be conducted on the engine or cutting deck unless:
• The engine has been stopped.
• The parking brake is engaged.
• The ignition key has been removed.
• The cutting deck has been disengaged.
• The ignition cables have been disconnected from the spark plugs.
Page Daily
mainte-
nance
before
-
75
(every
75
-
.
2)
-
2)
16
Clean and replace shall be done more often in dusty conditions.
2)
Daily Weekly At
3)
mainte- mainte- least
nance nance once
after a year
m
m
l
l
t
t
l
Performed by an authorized servicing dealer.
4)
Maintenance interval in
hours
25 50 100 300
m
l
l
t
t
l
The ride-on mower
3)
First
5)
19
English-