Applying Service Position Combiclip 94 - Husqvarna Rider 316T/s AWD Workshop Manual

Applying Service Position CombiClip 94

1. Put the machine in a level position. Apply and
secure the parking brake. Put the cutting
height control to its lowest position and lift up the
cutting deck.
2. Remove the front cover by loosening the
pin.
3. Undo the spring for the drive belt
tensioning wheel by loosening the
handle.
92
English-
rEPAir iNSTruCTiONS
8042-047
8042-463
8042-048