6.
Loosen the cable and the speed control
link rod from the horizontal arm.
7.
Remove the clutch control.
8.
Prise off the rear V-belt from the fan's belt
pulley. Place the belt above the groove on
the crankshaft pulley and insert it
between the fan blades.
9.
Remove the five screws holding the rear
axle and lower the rear axle.
rEPAir iNSTruCTiONS
Mounting screws left side
Mounting screws right side
Mounting screw rear axle
8009-835
8009-837
8009-836
61
English-