Bleeding The Drive System - Husqvarna Rider 316T/s AWD Workshop Manual

Bleeding the Drive System

iMPOrTANT iNFOrMATiON
Observe cleanliness. Do not reuse used oil.
Handle waste oil as hazardous waste. Avoid
skin contact, wash with soap and water if
spilled. See "Hydraulic hygiene" on
page 110.
iMPOrTANT iNFOrMATiON
Never run the reservoir empty during the
work. Fill the reservoir completely when
topping up. risk of air entering the system.
iMPOrTANT iNFOrMATiON
When the controls for the clutch valves
(bypass valves) in the front or rear axles are
extracted and the engine is running, the
drive pedals must not be operated.
1. Lift and support the machine so that all
the wheels can spin freely.
2. Remove the transmission cover.
WArNiNG!
Carbon monoxide danger with
running the engine.
3. Attach an exhaust hose.
72
English-
rEPAir iNSTruCTiONS
Supporting
Transmission cover
8009-851
6021-030