Husqvarna Rider 316T/s AWD Workshop Manual page 100

3. Remove the screw holding the belt pulley.
Secure the blade with a wooden block or
hold the belt pulley with an oil filter puller
for example.
Do not misplace the key that is between
the belt pulley and the shaft. Remove the
belt pulley, a puller may be required to do
this.
4. Loosen the blade bolt and remove it with
the washer and blade.
5. Loosen the four screws holding the blade
bearing and remove the whole bearing
package from the cutting deck.
6. Remove the metal protective washer.
100
English-
rEPAir iNSTruCTiONS
Securing blade
Blade bolt
Blade bearing screws
Removal of protective washer
8009-292
6042-278
6042-339
8042-340