Drive - Husqvarna Rider 316T/s AWD Workshop Manual

Hide thumbs Also See for Rider 316T/s AWD:
Table of Contents

Advertisement

Drive

All Rider AWD are equipped with hydrostatic
transmission, giving the driver full control.
Speed is controlled variably using the pedals
forward or back.
AWD machines are equipped with permanent
four-wheel-drive, so no differential lock is
required.
The hydraulic pump that provides oil to the
front and rear axles is built into the rear axle.
The pump is operated with cables from the
drive pedals.
The hydraulic oil filter is located in the back
section of the rear axle.
The hydraulic tank is separate and is located
above the rear axle.
Front axle on Rider AWD from above.
The axle comprises a hydraulic motor,
differential and drive shaft.
To move the machine without the front axle
drive engaged there is a mechanical bypass
valve that is operated with a control inside the
left wheel.
The bypass valve must be closed when
driving or the front axle will be drained of oil.
Rear axle on Rider AWD from above.
To move the machine without the rear axle
drive engaged there is a hydraulic bypass
valve that is operated with a control behind
the left wheel.
32
English-
DESiGN AND FuNCTiON
Transmission cover removed
Hydraulic filter
Front axle
Rear axle
8009-814
6020-003
8009-626
8009-838

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rider 316txs awdRider 316tRider 316t awdRider 322t

Table of Contents

Save PDF