3
Structure and function
Overview
3 Structure and function
3.1 Overview
14
Building Technologies
Fire Safety
In this document, the term 'detector' refers to an automatic fire detector that
communicates with a radio gateway and other radio devices in a radio cell using
radio signals. The detector is connected to a control panel FC20xx or FC72x via
the radio gateway and the detector line.
Properties
Radio communication with:
l
–
Radio gateway
–
Other radio devices
Signal processing with ASAtechnology and optional detection behavior
l
(application-specific ASA parameter sets)
Software can be used to set as:
l
–
Neural fire detector
–
Heat detector
–
Wide-spectrum smoke detector
Internal alarm indicator with status display (red and green):
l
–
identifies alarm
–
confirms positioning on detector base
–
confirms contact with the radio network
Easy installation on the detector base
l
A6V10227635_g_en_--
2015-03-11