Table 60. User Output Related Objects; Table 61. Physical Output Descriptions; Table 62. Bit Mask Descriptions - Parker P Series User Manual

2 Bit mask

Table 60. User Output Related Objects


Physical outputs descriptions
Bit
0 to 15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31

Table 61. Physical Output Descriptions


Bit mask descriptions
Bit
0 to 15
16
17
18
19
20
21
22
23
24 to 31

Table 62. Bit Mask Descriptions

Parker Hannifin
UDINT
Forced output of DO#1(I/O pin 35, 36)(0:OFF, 1:ON)
Provided that the relevant bit mask (0x60FE:02.16) is set to 1
Forced output of DO#1(I/O pin 37, 38) (0:OFF, 1:ON)
Provided that the relevant bit mask (0x60FE:02.17) is set to 1
Forced output of DO#1(I/O pin 39, 40) (0:OFF, 1:ON)
Provided that the relevant bit mask (0x60FE:02.18) is set to 1
Forced output of DO#1(I/O pin 41, 42) (0:OFF, 1:ON)
Provided that the relevant bit mask (0x60FE:02.19) is set to 1
Forced output of DO#1(I/O pin 43, 44) (0:OFF, 1:ON)
Provided that the relevant bit mask (0x60FE:02.20) is set to 1
Forced output of DO#1(I/O pin 45, 46) (0:OFF, 1:ON)
Provided that the relevant bit mask (0x60FE:02.21) is set to 1
Forced output of DO#1(I/O pin 47, 48) (0:OFF, 1:ON)
Provided that the relevant bit mask (0x60FE:02.22) is set to 1
Forced output of DO#1(I/O pin 49, 50) (0:OFF, 1:ON)
Provided that the relevant bit mask (0x60FE:02.23) is set to 1
DO #1output status (0:OFF, 1:ON)
DO #2output status (0:OFF, 1:ON)
DO #3 output status (0:OFF, 1:ON)
DO #4output status (0:OFF, 1:ON)
DO #5output status (0:OFF, 1:ON)
DO #6output status (0:OFF, 1:ON)
DO #7output status (0:OFF, 1:ON)
DO #8output status (0:OFF, 1:ON)
DO#1(I/O pin 35, 36)output status setting (0:Disable, 1:Enable)
DO#2(I/O pin 37, 38)output status setting (0:Disable, 1:Enable)
DO #3(I/O pin 39, 40)output status setting (0:Disable, 1:Enable)
DO #4(I/O pin 41, 42)output status setting (0:Disable, 1:Enable)
DO#1(I/O pin 43, 44)output status setting (0:Disable, 1:Enable)
DO#2(I/O pin 45, 46)output status setting (0:Disable, 1:Enable)
DO #3(I/O pin 47, 48)output status setting (0:Disable, 1:Enable)
DO #4(I/O pin 49, 50)output status setting (0:Disable, 1:Enable)
RW
Description
Reserved
Descriptions
Reserved
Reserved
P series User Guide
No -
96