Terminal Configuration; Establishing Communication; Table 19. Rs-422 Terminal Specification - Parker P Series User Manual

NOTE) When using PC as host controller, USB to RS-422 communication convertor is
required.

4.2.1 Terminal Configuration

Item
Communication Standard
Communication Protocol
Connector
Data bit
Data
Stop bit
Type
Synchronism
Transmission Speed
Transmission Distance
Power Consumption

Table 19. RS-422 Terminal Specification

4.2.2 Establishing Communication

The terminating resistance used for RS-422 communication is configured within this
drive.
The terminating resistance inside the drive is 120Ω. To use the terminating resistance,
turn on the switch as shown in the figure below.
Parker Hannifin
Parity
Speed can be selected at communication speed setting
Specifications
ANSI/TIA/EIA-422 Standard
MODBUS-RTU
RJ45 x 2
8bit
1bit
None
Asynchronous method
9600 /19200/38400/57600 [bps]
[0x3002]
Up to 200 [m]
Under 100[㎃]
P series User Guide 63