Important User Information - Parker P Series User Manual

Important User Information

It is important that motion control equipment is installed and operated in such a way that all
applicable safety requirements are met. It is your responsibility as an installer to ensure
that you identify the relevant safety standards and comply with them; failure to do so may
result in damage to equipment and personal injury. In particular, you should study the
contents of this user guide carefully before installing or operating the equipment.
The installation, set up, test, and maintenance procedures given in this User Guide should
only be carried out by competent personnel trained in the installation of electronic
equipment. Such personnel should be aware of the potential electrical and mechanical
hazards associated with mains-powered motion control equipment—please see the safety
warnings below. The individual or group having overall responsibility for this equipment
must ensure that operators are adequately trained.
Under no circumstances will the suppliers of the equipment be liable for any incidental,
consequential or special damages of any kind whatsoever, including but not limited to lost
profits arising from or in any way connected with the use of the equipment or this guide.
Warning
High-performance motion control equipment is capable of producing rapid
movement and very high forces. Unexpected motion may occur especially during the
development of controller programs. KEEP WELL CLEAR of any machinery driven by
stepper or servo motors. Never touch any part of the equipment while it is in operation.
This product is sold as a motion control component to be installed in a complete system
using good engineering practice. Care must be taken to ensure that the product is
installed and used in a safe manner according to local safety laws and regulations. In
particular, the product must be positioned such that no part is accessible while power may
be applied.
This and other information from Parker Hannifin Corporation, its subsidiaries, and
authorized distributors provides product or system options for further investigation by
users having technical expertise. Before you select or use any product or system, it is
important that you analyze all aspects of your application and review the information
concerning the product in the current product catalog. The user, through its own analysis
and testing, is solely responsible for making the final selection of the system and
components and assuring that all performance, safety, and warning requirements of the
application are met.
If the equipment is used in any manner that does not conform to the instructions given in
this user guide, then the protection provided by the equipment may be impaired.
The information in this user guide, including any apparatus, methods, techniques, and
concepts described herein, are the proprietary property of Parker Hannifin or its licensors,
and may not be copied disclosed, or used for any purpose not expressly authorized by the
owner thereof.
Since Parker Hannifin constantly strives to improve all of its products, we reserve the right
to modify equipment and user guides without prior notice. No part of this user guide may
be reproduced in any form without the prior consent of Parker Hannifin.
Parker Hannifin
P series User Guide
１３