Rear View - GRAPHTEC FC8600 Series User Manual

Rear View

Media lock
Media set lever . ..................... U sed to raise or lower the Push rollers during the loading or unloading of media.
Push roller hold-down force switching lever
.............................................. U sed to switch between the three push roller forces (outside push rollers only has
AC line inlet ........................... I nlet where the power cord is connected.
Media stocker . ....................... U sed to carry roll media and ensure its proper rotation.
Stock rollers . .......................... A media roll is placed on these rollers.
Media lock . ............................ U sed to prevent the stock rollers from rotating when the media roll has been
USB interface connector ....... U sed to connect the plotter to the computer with a USB interface cable.
Network interface connector .... U sed to connect the plotter to the computer with a network interface cable.
RS-232C interface connector
.............................................. U sed to connect the plotter to the computer with a RS-232C interface cable.
Push roller hold-down force switching lever
2 forces of strong and medium).
placed on top of them. The media lock ensures that the media is pulled straight
out from the roll.
1-4
Stock rollers
Media set lever
USB interface
RS-232C interface
Network interface
AC line inlet
Media stocker