Centering Motor Operation Time Test; Stacker Motor Operation Test - JCM GLOBAL UBA Pro Series Operation And Maintenance Manual

Calibration and Testing

Centering Motor Operation Time Test

To perform the Centering Motor Operation Time Test,
proceed as follows:
1. Launch the Performance Test Program (see
page 6-8).
2. Select "
CENTERING_TEST
3. Click the " "
Start
60 b).
Figure 6-60 Centering Motor Operation Time
b
a
Figure 6-60 Centering Motor Operation
Time Test 1
4. The measured time will appear in the "Centering
Motor" area (Figure 6-61 a) on the Screen.
5. Confirm that the operation time is in the accept-
able range: 100msec to 350msec.
6. Click the " "
Stop
61 b) to end the test.
Figure 6-61 Centering Motor Operation Time
b
a
Figure 6-61 Centering Motor Operation
Time Test 2
P/N 960-000211R_Rev. A
UBA™ Pro Series Universal Banknote Acceptor
" (Figure 6-60 a).
Screen Button (Figure 6-
Screen Button (Figure 6-
6 - 1 3

Stacker Motor Operation Test

To perform the Stacker Motor Operation Test without
the Cash Box, proceed as follows:
1. Launch the Performance Test Program (see
page 6-8).
2. Select "
STACKER_MOTOR_FWD_TEST
ure 6-62 a).
3. Click the " "
Start
62 b).
Figure 6-62 Stacker Motor Operation Test 1
a
b
Figure 6-62 Stacker Motor Operation Test 1
4. Remove the Cash Box.
NOTE: Be sure to remove the Cash Box
to avoid the risk of damage.
5. Click the " "
OK
start.
Figure 6-63 Stacker Motor Operation Test 2
Figure 6-63 Stacker Motor Operation Test 2
6. Confirm that the Stack Gear is spinning normally.
Figure 6-64 Stacker Motor Operation Test 3
Figure 6-64 Stacker Motor Operation Test 3
7. Click the " "
Stop
65 a) to end the test.
Figure 6-65 Stacker Motor Operation Test 4
a
Figure 6-65 Stacker Motor Operation Test 4
© 2020, JAPAN CASH MACHINE CO., LTD.
Section 6
" (Fig-
Screen Button (Figure 6-
button (Figure 6-63 a) to
a
Stack Gear
Screen Button (Figure 6-