Stacker Motor Operation Time Test; Pb Motor Operation Time Test - JCM GLOBAL UBA Pro Series Operation And Maintenance Manual

Section 6
5. The resulting indication will appear in the "
" area (Figure 6-55 a) on the Screen.
switch
6. Confirm that indication changes "
" " as the Switch is set.
OFF
7. Click the " "
Stop
55 b) to end the test.
Figure 6-55 DIP Switch Test 3
b
a
Figure 6-55 DIP Switch Test 3

Stacker Motor Operation Time Test

To perform the Stack Motor Operation Time Test, pro-
ceed as follows:
1. Launch the Performance Test Program (see
page 6-8).
2. Select "
STACK_TEST
3. Click the " "
Start
56 b).
Figure 6-56 Stacker Motor Operation Time Test
b
a
Figure 6-56 Stacker Motor Operation Time Test 1
4. The measured time will appear in the "
Motor UP/DOWN
Screen.
5. Confirm that the operation time is in the accept-
able range: 300msec to 1000msec.
6. Click the " "
Stop
57 b) to end the test.
Figure 6-57 Stacker Motor Operation Time Test
b
a
Figure 6-57 Stacker Motor Operation Time Test 2
P/N 960-000211R_Rev. A
UBA™ Pro Series Universal Banknote Acceptor
" and
ON
Screen Button (Figure 6-
" (Figure 6-56 a).
Screen Button (Figure 6-
Stacker
" area (Figure 6-57 a) on the
Screen Button (Figure 6-

PB Motor Operation Time Test

DIP
To perform the PB Motor Operation Time Test, proceed
as follows:
1. Launch the Performance Test Program (see
page 6-8).
2. Select "
PB_TEST
3. Click the "
58 b).
Figure 6-58 PB Motor Operation Time Test 1
Figure 6-58 PB Motor Operation Time Test 1
4. The measured time will appear in the "
area (Figure 6-59 a) on the Screen.
5. Confirm that the operation time is in the accept-
able range: 150msec to 300msec.
6. Click the "
59 b) to end the test.
Figure 6-59 PB Motor Operation Time Test 2
Figure 6-59 PB Motor Operation Time Test 2
6 - 1 2
Calibration and Testing
" (Figure 6-58 a).
" Screen Button (Figure 6-
Start
b
a
" Screen Button (Figure 6-
Stop
b
a
© 2020, JAPAN CASH MACHINE CO., LTD.
"
PB Motor