JCM GLOBAL UBA Pro Series Operation And Maintenance Manual page 119

Troubleshooting
Green Red
LED LED
When transporting a Banknote to
Flashes
the Cash Box, the Sensors are not
OFF
(3)
detecting a Banknote present
condition when the time interval is
too long, or the number of the
Banknotes is greater than
specified value for the function.
(Acceptor Head Unit)
When transporting or returning a
Banknote in the Acceptor Head
OFF Flashes
Unit, the Sensors did not detect a
(4)
Banknote present condition when
the time interval was too long, or
the number of the Banknotes in
path is greater than specified
value for the function.
Flashes
OFF
Motor speed is greater or less
(5)
than the specified value.
Transport Motor Lock-Up
Flashes
OFF
Motor locked while transporting a
(6)
Banknote.
Stacker MotorLock-UP
Flashes
OFF
Motor locked while stacking a
(7)
Banknote.
OFF Flashes
The Anti-Pullback (PB) Unit has
(9)
not performed correctly.
OFF Flashes
(10)
The Cash Box has been removed.
Flashes
OFF
Sensors detect Banknotes
(12)
occurring with abnormal timing.
Centering Mechanism
Flashes
OFF
(14)
The Centering Guide has not
moved
P/N 960-000211R_Rev. A
UBA™ Pro Series Universal Banknote Acceptor
Table A-4 Standard LED Error Codes (Continued)
Standard Errors
Banknote Jam
(Cash Box)
Banknote Jam
Motor Speed Error
PB Unit Error
Cash Box Removal
Fraud Detection
Abnormal
Solutions
•
Check that the relative parts
are properly assembled and/
or Harness are connected.
•
Clean or adjust the relative
parts and Sensors.
•
Check that the relative parts
are properly assembled and/
or Harness are connected.
•
Clean or adjust the relative
parts and Sensors.
•
Check that the relative parts
are properly assembled and/
or Harness are connected.
•
Clean or adjust the relative
parts and Sensors.
•
Firmly re-seat the Cash Box.
•
Check that the relative parts
are properly assembled and/
or Harness are connected.
•
Clean or adjust the relative
parts and Sensors.
•
Firmly re-seat the Cash Box.
•
Check that the relative parts
are properly assembled and/
or Harness are connected.
•
Clean or adjust the relative
parts and Sensors.
•
Check that the relative parts
are properly assembled and/
or Harness are connected.
•
Check that the relative parts
are properly assembled and/
or Harness are connected.
•
Clean or adjust the relative
parts and Sensors.
•
Check that the relative parts
are properly assembled and/
or Harness are connected.
•
Clean or adjust the relative
parts and Sensors.
•
Check that the relative parts
are properly assembled and/
or Harness are connected.
•
Clean or adjust the relative
parts and Sensors.
A - 5
Relative
Parts/Sensors
•
Exit Sensor
•
Pusher Mechanism
•
Stacker Motor
•
Stacker Home Sensor
•
Stacker Motor Encoder
•
Entrance Sensor
•
Centering Timing
Sensor
•
Line Sensor, PB
Entrance Sensor
•
Exit Sensor
•
Entry Motor
•
Entry Motor Encoder
•
Entry Motor
•
Entry Motor Encoder
•
Entry Motor
•
Entry Motor Encoder
•
Stacker Motor
•
Stacker Encoder
•
PB Unit
•
PB Home Position
Sensor
•
Box Sensor
•
Exit Sensor 2
•
Line Sensor
•
Centering Guide
•
Centering Motor
•
Centering Guide Home
Sensor
© 2020, JAPAN CASH MACHINE CO., LTD.
Appendix A