Main Board Removal - JCM GLOBAL UBA Pro Series Operation And Maintenance Manual

Disassembly/Reassembly
2. Release the six (6) Locking Tabs (Figure 4-9
through a ), and remove the Side Cover L (Fig-
6
ure 4-9 b).
a
Figure 4-9 Sub Board Removal 2
3
a
2
a
1
b
a
a
5
a
4
Figure 4-9 Sub Board Removal 2
3. Remove the five (5) Screws (Figure 4-10
through a ).
5
a
Figure 4-10 Sub Board Removal 3
a
1
Figure 4-10 Sub Board Removal 3
4. Hold each side of the Bottom Cover (Figure 4-11
a) with your hands as illustrated in Figure 4-11.
5. Slide and remove the Cover as indicated by the
Arrow.
Figure 4-11 Sub Board Removal 4
Figure 4-11 Sub Board Removal 4
NOTE: Do Not lift up the Release Lever
(Figure 4-11 b) when removing the Bottom
Cover to avoid the risk of damage to the
Main Board.
P/N 960-000211R_Rev. A
UBA™ Pro Series Universal Banknote Acceptor
6
a
1
2
a
a
4
5
a
3
a
b
a 6. Remove the two (2) Screws (Figure 4-12
1
a ), and remove the Sub Board (Figure 4-12 b).
2
Figure 4-12 Sub Board Removal 5
Figure 4-12 Sub Board Removal 5

Main Board Removal

To remove the Main Board, proceed as follows:
1. Unplug the two (2) Connectors (Figure 4-13
a ), and remove the FPC Harness (Figure 4-13 b)
2
as illustrated by the Arrows.
b
Figure 4-13 Main
Board Removal 1
a
1
Figure 4-13 Main Board Removal 1
2. Unplug the six (6) Connectors (Figure 4-14
through a ).
6
Figure 4-14 Main Board Removal 2
a
Figure 4-14 Main Board Removal 2
© 2020, JAPAN CASH MACHINE CO., LTD.
4 - 3
a
2
a
1
b
b
a
3
a
a
2
1
Section 4
a &
1
a &
1
a
2
a
1
4
a
5
a
6