Table of Contents
Advertisement
Installation
External Harness Installation
NOTE: Prepare the following Screw:
•
M3x12 Screw (provided)
•
Tightening Torque: 80N·cm
1. Secure the Connector (Figure 2-6 a) using two
(2) specified Screws (Figure 2-6
Figure 2-6 External Harness Installation
Figure 2-6 External Harness Installation
Cash Box Lock Installation
One or two security locks can be installed onto a
UBA Pro Cash Box. When installing a security
lock, the following attachment accessories may be
required:
•
Two Key Spacers
•
Plate Lock Keys
•
Key Cap Attachment.
Figure 2-7 Key Hole Location
Key Holes
Figure 2-7 Key Hole Location
Choose a Lock that fits a standard 5/8", 1-1/8" or
20.5mm hole dimension format (Figure 2-8). In
addition, when two locks are to be installed, both
locks must be identical.
Figure 2-8 Key Hole Dimension & Cylinder
Figure 2-8 Key Hole Dimension & Cylinder Length
P/N 960-000211R_Rev. A
UBA™ Pro Series Universal Banknote Acceptor
b
&
b
).
1
2
a
Length
Unlock Procedure
Make sure lock(s) are installed and rotates in the
correct direction(s).
NOTE: When two locks are installed, they
must rotate in the same direction as
illustrated in Figure 2-9.
Figure 2-9 Key Lock Rotation Requirement
5/8" or 1-1/8" hole
Unlock
b
1
b
2
Figure 2-9 Key Lock Rotation Requirement
NOTE: When using only one lock, the
remaining blank hole does not provide
access to Cash Box contents. However,
some regulatory authorities may require
installation of a Key Cap.
Figure 2-10 Key Cap Installation
Figure 2-10 Key Cap Installation
NOTE: There are many lock designs, and
Key Spacer washers may be required for
some lock types. Locks vary greatly in price,
security, keying policies, etc. The customer
is responsible for selecting a Lock with
performance that fits the intended purpose.
JCM does not test or endorse any specific
brand of Lock for its security characteristics.
© 2020, JAPAN CASH MACHINE CO., LTD.
2 - 3
Section 2
20.5mm hole
Unlock
Use Key Cap
Advertisement
Chapters
Table of Contents
