Specifications; Technical Specifications - JCM GLOBAL UBA Pro Series Operation And Maintenance Manual

Universal banknote acceptor
Table of Contents

Advertisement

Section 1

Specifications

Technical Specifications

*
Acceptance Rate
:
Banknote Types Accepted
Insertion Direction
:
Barcode Ticket
:
**
Processing Speed
:
Validation Method:
Diagnostic Indicators:
Escrow:
Anti-Pullback Mechanism:
††
Cash Box
:
‡‡
Cash Box Capacity
***
Interface
:
*. The Banknotes accepted on the second attempt are included. The Acceptance Rate Test was conducted on more than 100 Banknotes. Refer to the "Software Information
Sheet" for each Country's Acceptance Rate parameters.
†. Refer to the "Software Information Sheet" for more details.
‡. Refer to the "Barcode Ticket Specification" for more details.
**. Excluded Host Communication time lag. The "from Banknote insertion to enable of next insertion" is a processing speed per Banknote when 10 Banknotes are consecutively
inserted.
††.A key and lock are not included (A tang is provided). Refer to "Cash Box Lock Installation" on page 2-3 for the installation. (1 Key Hole Cap is fitted in place to cover existing
holes when shipped).
‡‡.The number of Banknotes or Barcode Tickets stacked depends on its condition.
***.Refer to "Type Descriptions" on page 1-2 for the Sub Boards supporting each Interface.
P/N 960-000211R_Rev. A
UBA™ Pro Series Universal Banknote Acceptor
Table 1-4 UBA Pro Technical Specification
98% or greater
Note: The following banknote types are excluded:
Banknotes with excess or unclear graphics
Double (dual) Notes
Worn, dirty, wet, stained, torn or excessively wrinkled Banknotes
Banknotes having folded corners or edges
Banknotes having the wrong cut dimensions or printing displacement
Returned Banknotes because of incorrect or failed insertion.
Long side: 120mm - 165mm (4.72 - 6.49in.)
:
Short side: 62mm - 85mm (2.44 - 3.34in.)
Banknote: Four-way
Barcode Ticket: Four-way with Upper and Lower Barcode Sensor option
Read code: ITF (Interleaved 2 of 5)
Narrow Bar: 0.5mm-0.6mm (0.019-0.023 in.)
Wide Bar to Narrow Bar ratio = 3:1
Characters: 18 Characters
Print Position: Middle (Divides a Ticket equally from the left, right, top and bottom
of the Ticket's center)
Print Width: Wider than 10mm (0.39 in.)
2.2 seconds or faster (from Banknote insertion to enable of next insertion)
Optical
Status LEDs (Red/Green/Orange)
Refer to "LED Light Flashing Pattern" on page 2-5.
1 Note
Pull-Back (PB) Unit (Anti-pullback System - JCM Patented)
Security Box (Standard)
ICB Box (Intelligent Cash Box) (Optional)
500 notes (Street Grade)
:
900 notes (Street Grade)
USB (USB Specification Rev. 2.0 Compliance) (Full Speed/12Mbps)
Photo-Coupler Isolation
RS232C
cc-Talk
TTL
© 2020, JAPAN CASH MACHINE CO., LTD.
1 - 6
General Information

Advertisement

Table of Contents
loading

Table of Contents