Non-Validation Banknote Acceptance With Cash Box; Non-Validation Banknote Acceptance Without Cash Box - JCM GLOBAL UBA Pro Series Operation And Maintenance Manual

Section 6
Non-Validation Banknote Acceptance
with Cash Box
To perform the Non-Validation Acceptance Test
with the Cash Box, proceed as follows:
1. Remove electrical power.
2. Set the DIP Switches as below (Figure 6-80).
Figure 6-80 Non-Validation Banknote
DIP Switches #1, #2, #3, #4, #6, #8 ON
Acceptance with Cash Box 1
ON
1 2 3
Figure 6-80 Non-Validation Banknote Acceptance
with Cash Box 1
3. Ensure that the Cash Box is properly installed.
4. Apply electrical power.
5. Confirm that the
lit.
Figure 6-81 No
Figure 6-81 Non-Validation Banknote Acceptance
with Cash Box 2
6. To start the Test, set the DIP Switch #8 to
(Figure 6-82).
Figure 6-82 Non-
DIP Switch #8 OFF
ON
1 2 3
Figure 6-82 Non-Validation Banknote Acceptance
with Cash Box 3
7. Insert a Banknote.
8. Confirm that the UBA Pro accepts and stacks the
Banknote into the Cash Box.
9. Set the UBA Pro DIP Switch #8 to
test.
P/N 960-000211R_Rev. A
UBA™ Pro Series Universal Banknote Acceptor
4 5 6 7 8
Green and Red Status LEDs are
Green Red
OFF
4 5 6 7 8
to end the
ON
Non-Validation Banknote Acceptance
without Cash Box
To perform the Non-Validation Acceptance Test
without the Cash Box, proceed as follows:
1. Remove electrical power.
2. Set the DIP Switches as below (Figure 6-83).
Figure 6-83 Non-Validation Banknote
DIP Switches #1, #2, #3, #5, #8 ON
Acceptance without Cash Box 1
ON
1 2 3
Figure 6-83 Non-Validation Banknote Acceptance
without Cash Box 1
3. Remove the Cash Box.
4. Apply electrical power.
5. Confirm that the
lit.
Figure 6-84 No
Figure 6-84 Non-Validation Banknote Acceptance
without Cash Box 2
6. To start the Test, set the DIP Switch #8 to
(Figure 6-85).
Figure 6-85 Non-
DIP Switch #8 OFF
ON
1 2 3
Figure 6-85 Non-Validation Banknote Acceptance
without Cash Box 3
7. Insert a Banknote.
8. Confirm that the UBA Pro accepts and stacks the
Banknote into the Cash Box.
9. Set the UBA Pro DIP Switch #8 to
test.
© 2020, JAPAN CASH MACHINE CO., LTD.
6 - 1 8
Calibration and Testing
4 5 6 7 8
Green and Red Status LEDs are
Green Red
OFF
4 5 6 7 8
to end the
ON