Troubleshooting
Table A-7 LED Flash Reject Error Codes For Barcode Tickets (Continued)
Green
Red
LED
LED
Flashes
When adjusting Barcode
OFF
Ticket data, Sensors
(7)
detected an abnormal
Barcode Ticket
magnification condition.
Flashes
OFF
Two or more Barcode
(8)
Tickets were inserted.
Flashes
OFF
(9)
A Barcode Ticket is inserted
upside-down.
Flashes
OFF
The Bar Sensors calculated
(10)
a Barcode Ticket length
longer or shorter than the
specified value.
Flashes
OFF
(11)
Flashes
OFF
(12)
P/N 960-000211R_Rev. A
UBA™ Pro Series Universal Banknote Acceptor
Reject Errors
(Barcode Ticket)
•
Abnormal
•
Magnification
•
•
Double Tickets Error
•
Upside-Down
•
Insertion
•
•
Barcode Ticket
Length Abnormal
•
•
Contact your local JCM Representative if this error occurs.
Reserved
Contact your local JCM Representative if this error occurs.
Reserved
Solutions
Check that a proper Barcode
Ticket is used.
Check that the Ticket is not
damaged or dirty.
Check that the relative parts are
properly assembled and/or
Harness are connected.
Clean or adjust the relative parts
and Sensors.
Insert a single Barcode Ticket.
Insert a Barcode Ticket in an
proper direction
Check that a proper Barcode
Ticket is used.
Check that the Ticket is not
damaged or dirty.
Check that the relative parts are
properly assembled and/or
Harness are connected.
Clean or adjust the relative parts
and Sensors.
A - 9
Relative
Parts/Sensors
•
Bar Sensor
•
The number of
Barcode Ticket
•
The Barcode Ticket
insertion direction
•
Bar Sensor
© 2020, JAPAN CASH MACHINE CO., LTD.
Appendix A