Part 2 - Usb Drivers Installation - JCM GLOBAL UBA Pro Series Operation And Maintenance Manual

Section 6
5. Click the "Next>"
6-4 a) when the "
shown in Figure 6-4 appears.
Figure 6-4 JCM Tool Suite Installation 3
Figure 6-4 JCM Tool Suite Installation 3
6. When the "
Ready to Install the Program
appears, select "
" (Figure 6-5 a) and then click the
(all users)
" "
Install
start the installation.
Figure 6-5 JCM Tool Suite Installation 4
Figure 6-5 JCM Tool Suite Installation 4
7. Once installation is complete, the "
Wizard Completed
will appear.
Click the "
Finish
6-6 a) to end the installation process.
Figure 6-6 JCM Tool Suite Installation 5
Figure 6-6 JCM Tool Suite Installation 5
This completes the "
JCM Tool Suite Standard Edition
installation procedure.
P/N 960-000211R_Rev. A
UBA™ Pro Series Universal Banknote Acceptor
Screen Button (Figure
" Screen
Destination Folder
a
" Screen
Anyone who uses this computer
Screen Button (Figure 6-5 b) to
a
b
InstallShield
" Screen shown in Figure 6-6
" Screen Button (Figure
a

Part 2 - USB Drivers Installation

USB Drivers need to be installed on the PC before
the JCM Tool Suite Standard Edition can be used.
To install the Driver, proceed as follows:
NOTE: The USB Driver Installation Wizard
Screen appears when the JCM Tool Suite
installation is completed (Go to Step 3).
NOTE: Step 1 and 2 are reserved for when the
USB Drivers need to be installed manually.
1. Copy the provided Driver into the desired PC
Folder.
2. Connect the USB Cable to the Unit. (Refer to
Figure 6-1 for the Tool Requirements and Har-
ness Connector locations.)
3. When the Device Driver Installation Wizard
Screen (Figure 6-7) appears, click the "Next>"
Screen Button (Figure 6-7 a) to install the
driver.
Figure 6-7 USB Drivers Installation 1
Figure 6-7 USB Drivers Installation 1
4. When the USB Driver Installation is complete,
the "
Completing the Device Driver Installation
" Screen will appear as shown in Figure 6-
Wizard
8.
5. Click the "
Finish
6-8 a) to close the Screen.
Figure 6-8 USB Drivers Installation 2
Figure 6-8 USB Drivers Installation 2
NOTE: If the Windows Security Screen appears,
select "Install this Driver Software (I)" to proceed.
This completes the USB driver installation proce-
dure.
"
© 2020, JAPAN CASH MACHINE CO., LTD.
6 - 2
Calibration and Testing
a
" Screen Button (Figure
a