Sub Board 2: Photo-Coupler Isolation Connector Pin Assignment - JCM GLOBAL UBA Pro Series Operation And Maintenance Manual

Section 2

Sub Board 2: Photo-Coupler Isolation Connector Pin Assignment

Table 2-10 lists the UBA Pro Unit's Sub Board 2 Photo-Coupler Isolation Connector Pin Assignments.
Table 2-10 Sub Board 2 Photo-Coupler Isolation Interface Pin Assignments
Rear View
Pin No. Signal Name
Power
1
2 GND (Power)
3 M.RES
4 TXD
5 +12V (I/F)
6 RXD
7 Opto-GND
8
9
10
11
12
13 GND (SG)
14 LED POWER
15
16
17
18 LED -
19
20 SU SELECT
*. I/O (input/output) is the terminal as viewed from the Banknote Acceptor's backside.
†. No Connection = Standard (SS) Installation type. Connected Pin #20 to Pin #13 (GND SG) = Stacking Up (SU) Installation type.
P/N 960-000211R_Rev. A
UBA™ Pro Series Universal Banknote Acceptor
Socket (UBA Pro Side): DRA-20PC-FO (JAE)
Contact (UBA Pro Side) Pin No.1 and No.2: D02-22-22P-10000 (JAE)
Contact (UBA Pro Side) Pin No.3 - No.20:D02-22-26P-10000 (JAE)
Socket (Frame Side): DRA-20SC-FO (JAE)
Contact (Frame Side) Pin No.1 and No.2: D02-22-22S-10000 (JAE)
Contact (Frame Side) Pin No.3 - No.20: D02-22-26S-10000 (JAE)
*
I/O
+12V to +24V DC Power Supply
-
- DC Power Supply
IN Acceptor Reset Signal Line
OUT Output Signal Line from Acceptor to Controller
- Interface Power Supply (+12V DC)
IN Input Signal Line from Controller to Acceptor
- Interface Power Supply (Photo-Coupler Isolation, 0V DC)
- - No Connection
- - No Connection
- - No Connection
- - No Connection
- - No Connection
- 0V DC Power Supply
- LED Drive Line (Anode)
- - No Connection
- - No Connection
- - No Connection
OUT LED Drive Line (Cathode)
- - No Connection
IN
Standard (SS)/Stacking Up (SU) Selection
Function
© 2020, JAPAN CASH MACHINE CO., LTD.
2 - 1 2
Installation
†