Box Sensor Removal; Sub Board Removal - JCM GLOBAL UBA Pro Series Operation And Maintenance Manual

Section 4
Figure 4-3 LED Light Module and Upper Bar
Sensor Removal 2
Figure 4-3 LED Light Module and Upper Bar
Sensor Removal 2
3. Unplug the two (2) Connectors (Figure 4-4
a ), and remove the FPC Harness (Figure 4-4 b).
2
Figure 4-4 LED Light Module and Upper Bar
Sensor Removal 3
b
Figure 4-4 LED Light Module and Upper Bar
Sensor Removal 3
4. Remove the three (3) Screws (Figure 4-5
through a ), and remove the LED Light Module
3
(Figure 4-5 b).
5. Remove the two (2) Screws (Figure 4-5
and remove the Upper Bar Sensor (Figure 4-5 d).
Figure 4-5 LED Light Module and Upper Bar
Sensor Removal 4
b
d
Figure 4-5 LED Light Module and Upper Bar
Sensor Removal 4
P/N 960-000211R_Rev. A
UBA™ Pro Series Universal Banknote Acceptor
b
a
1
a
a
4
2
a
5
a
a
3
6
a
1
a
a
1
a
1
c &
1
a
a
1
2
a
3
c
c
1
2

Box Sensor Removal

To remove the Box Sensor, proceed as follows:
1. Release the two (2) Locking Tabs (Figure 4-6
& a ), and remove the Back Cover (Figure 4-6 b).
2
Figure 4-6 Box Sensor Removal 1
a
1
b
Figure 4-6 Box Sensor Removal 1
&
2. Unplug the single (1) Connector (Figure 4-7 a),
and remove the FPC Harness (Figure 4-7 b).
3. Remove the two (2) Screws (Figure 4-7
and remove the Box Sensor (Figure 4-7 d).
Figure 4-7 Box Sensor Removal 2
2
Figure 4-7 Box Sensor Removal 2

Sub Board Removal

c ),
2
To remove the Sub Board, proceed as follows:
1. Release the six (6) Locking Tabs (Figure 4-8
through a ), and remove the Side Cover R (Fig-
6
ure 4-8 b).
Figure 4-8 Sub Board Removal 1
Figure 4-8 Sub Board Removal 1
© 2020, JAPAN CASH MACHINE CO., LTD.
4 - 2
Disassembly/Reassembly
a
2
c &
1
c
c
2
1
b
d
a
b
a
1
a
2
a
3
a
4
a
5
a
6
a
1
c ),
2
a
1