Sensor Cleaning; Bnf Assembly Cleaning; Bnf Remaining Sensor/Start Sensor Cleaning - JCM GLOBAL RDM-100 Series Integration Manual

Sensor Cleaning

Each Sensor, Roller and Belt cleaning is performed
by opening each Unit Transport Path. Identify each
sensor location while referring to the RDM-100
Sensor locations (Figure 35) and wipe the Sensors
indicated by the Yellow Color using dry lint-free
micro-fiber cloth and clean the Rollers and Belts
indicated by a Green and a Brown Color using a
slightly damp (not wet) lint-free Micro-fiber cloth.
• Sensors (Yellow Color)
• Rollers (Green Color)
• Belts (Brown Color)
NOTE: To open each Unit's Transport Path,
refer to the "Clearing a Banknote Jam" on
page 12.
BNF A C
SSEMBLY LEANING

BNF Remaining Sensor/Start Sensor Cleaning

Open the BNF Top Cover, and clean the BNF Sensors and Rollers.
Figure 36 BNF Assembly Sensor/Roller
Cleaning Locations
BNF
Start
Sensor
The non-flammable Compressed Air Spray must be used for the Upper BNF Start Sensor and the Upper BNF
Remaining Sensor ONLY.
P/N 960-000186R_Rev. A {EDP #253995}
RDM-100™ Series Retail Deposit Module
Use non-flammable
Compressed Air
Spray to Clean
BNF
Remaining
Sensor
Figure 36 BNF Assembly Sensor/Roller Cleaning Locations
© 2016, JAPAN CASH MACHINE CO., LTD.
1 8
Retard
Roller
Feed
Roller
Pick Up
Roller
Pinch
Roller