Section 2
iVIZION™2 Series Banknote Validator Foundation of Intelligent Validation
2
SPECIFICATIONS
This section provides specifications of the iVIZION™2 Series Banknote Validator (iVIZION2).
Technical Specifications
Acceptance Rate
Types Accepted:
Insertion Direction
Acceptance Rate:
Standard
Specification:
Insertion Direction: Four-way
2D Barcode
"Bill-to-Bill"
Processing Speed
Escrow:
Validation Method:
Fraud Detection:
††
Cash Box Type
Cash Box Capacity
Interface:
Diagnostic Indicators:
*. The Banknotes accepted at the second attempt are included. The Acceptance Rate Test was conducted with more than 100 Banknotes. Refer to the "Software Information
Sheet" for each Country's Acceptance Rate parameters.In cases of software with security components, such as anti-counterfeit-bill, the acceptance rate may be lower.
†. Refer to the "Software Information Sheet" for the supported denominations and the detailed Banknote insertion direction per currency.
‡. Refer to the "iVIZION2 Barcode Specifications" for more details.
**. From Banknote insertion to capable of accepting a next Banknote. Excluded Host Communication time lag. The "from Banknote insertion to enable of next insertion" is a pro-
cessing speed per Banknote when 10 Banknotes are consecutively inserted. To change the mode, use the JCM Tool Suite app ("Utility" menu).
††.A key and a lock are not included (A tang is provided). Refer to "Security Lock Installation" on page 12 for the installation. (1 Key Hole Cap is fitted in place to cover existing
holes when shipped).
‡‡.The number of Banknotes or Barcode Tickets stacked depends on its condition.
P/N 960-000231R_Rev. A
Table 5 iVIZION2 Technical Specifications
98% or greater (The following Banknote types are excluded)
•
Banknotes with excess or poor magnetism or unclear graphics
•
Double (dual) Notes
•
Dirty, scrubbed, wet, stained, torn, holed, worn-out, folded, or excessively creased
*
:
or wrinkled Banknotes
•
Banknotes having folded corners or edges
•
Banknotes having the wrong cut dimensions or printing displacement
•
Returned Banknotes because of incorrect or failed insertion.
Long side
SS Type: 110mm - 170mm (4.33 - 6.69 in.)
in.)
†
Four-way
:
98% or greater (The following Ticket types are excluded)
•
Barcodes having wrinkles or folds
•
Read code: Interleaved 2 of 5 (TiTo)
•
Narrow Bar: 0.5mm - 0.6mm (0.019-0.023 in.)
•
Wide Bar to Narrow Bar ratio = 3:1
•
Characters: 18 Characters
•
Print Position: Middle (Divides a Ticket equally from the left, right, top and bottom
of the Ticket's center)
•
Print Width: Wider than 10mm (0.39in.)
QR Code, PDF417 and Data Matrix
•
Minimum Module Size: 1mm x 1mm
Normal Mode: 1.5 seconds or faster
**
Current Limit Mode (12V DC 3A): 1.9 seconds or faster
:
1 Note
Optical
Equipped (Anti-pullback System, Optical Detection)
Secure Cash Box
:
Intelligent Cash Box (ICB) (RFID available)
Standard Box: 500 Banknotes
‡‡
:
Large Box: 900 Banknotes
•
USB (USB Specification Rev. 2.0 Compliance) (Full Speed/12Mbps)
•
Photo-Coupler Isolation
•
RS232C
•
cc-Talk
•
TTL
Power LED, Status LED, Bezel LED (Optional)
Short side: 60mm - 85mm (2.36 - 3.34
© 2022, JAPAN CASH MACHINE CO., LTD.
8
Specifications