Model Descriptions; Type Descriptions; Software Descriptions; Precautions - JCM GLOBAL DBV Series Integration Manual

Model Descriptions

Table 1 lists the product model number
descriptions.

Table 1 DBV-400 Model Number Specifications

Model: DBV- 4 * * - (*) * *
o
N
o
N
(1) Product Series Name
Validator Sensor
(2)
0 = Type A (Standard)
1-9 = Reserved
Transport Unit
(3)
0 = Standard
1-9 = Reserved
Optional Unit (Banknote Insertion Section)
(4)
None = Standard
A-Z = Reserved
Stacker Type
(5)
SU/SD = Downward Stacking/Upward Stacking (Standard)
SH = Reserved
UH = Reserved

Type Descriptions

Table 2 lists the product type number descrip-
tions.

Table 2 DBV-400 Type Number Specifications

Model: ***(*) - * * * * * - **
o
N
o
N
Cash Box Capacity
(1)
0 = No Cash Box (Transport Unit Specification)
S = 300 notes (New Banknote)
M = 500 notes (New Banknote)
L= 1000 notes (New Banknote)
Cash Box Type
(2)
0 = Standard
1 - 9 = Reserved
Cash Box Door
(3)
0 = Standard
1 - 9 = Reserved
Bezel (Option)
0 = JCM Standard Bezel (Standard)
1 = Snack Mask
2 = TOB
(4)
3 = Euro 2-Rows SU
4 = Reserved
5 = Euro 2-Rows Compatible
A = Reserved
B = Reserved
Centering Guide Chip Type
(5) 0 = 66mm
1 = Reserve
2 = 72mm
3 - 9 = Reserved
Optional Coating
(6)
0 = None (Standard)
1 = Coated Board
2 - 9 = Reserved
Interface
0 = None (Standard)
(7)
1 = Standard Harness
2 = USB Interface Harness
3 - 9 = Reserved
*. The numbers of stacked Notes depends on the Banknote's condition.
P/N 960-000175R_Rev. A {EDP #233426}
®
DBV Series Banknote Validator (DBV-400) Integration Guide
(1) (2)(3) (4) (5)
(1) (2)(3)(4)(5)(6) (7)
*

Software Descriptions

Table 3 lists the software number descriptions.

Table 3 DBV-400 Software Number Specifications

Software: DBV-400 * * * - 0 * * - V * .**
o
N
o
N
(A) Software Model Name
(B) Denomination (Country Code)
(C) Interface Protocol Name
(D) Software Version
*. The Country Code is indicated following the ISO 3166 Standard.

Precautions

Type 1 Type 2

Figure 2 Precautionary Symbols

Symbols in Figure 2 are defined as follows:
1. Do not insert a torn, folded, or wet
(Type 1)
Banknote; it may cause a jam inside the unit.
2. Do not expose the unit to water. The unit
(Type 2)
contains several precision electronic devices that
can be damaged if water or any liquid is sprayed
or spilled into the unit.
3. Do not install the unit in a dusty
(Type 3)
environment. Dust may affect/degrade the sen-
sor's performance.
U C
SER AUTIONS
Careful measures were taken in the design of this
product to ensure its quality; however, the follow-
ing cautions pertain to all users and should be fol-
lowed for safe operation.

Installation Cautions

The Installation Cautions are defined as follows:
1. Be sure the Host Machine contains enough
protection to avoid wet or dusty conditions when
installing the unit in an indoor or open-air space.
The unit is not designed for outdoor installations.
2. Be sure the Host Machine is designed with
careful consideration for retrieving a Banknote
and/or clearing a Banknote jam.
3. Be careful not to use excessive outside pressure
on the Mounting Plate when removing the Cash
Box from the Unit.
© 2014, JAPAN CASH MACHINE CO., LTD.
2
(A) (B) (C) (D)
*
Type 3