Filter Groups Dialog Box; Cluster Address - Compaq 124708-001 - ProLiant Cluster - 1850 Software User's Manual

System Management for Microsoft Windows NT Server 4.0, Enterprise Edition 5-9

Filter Groups Dialog Box

The Filter Groups dialog box (Figure 5-6) is used to create, edit, or delete
groups in the group list hierarchy.
Follow these steps to launch the Filter Groups dialog:
1. From the Group window in the Device List window, select the group
you want to work with. (For example, if you want to create a group
within Network, select Network.)
2. Select the Set Up Group button on the control bar.
Figure 5-6. Filter Groups dialog box
The Insert cluster shortcut button allows you to create shortcuts for existing
cluster groups and place them in different levels in the group hierarchy.

Cluster Address

A cluster address acts as a proxy, communicating with different servers in the
cluster depending on the state of the cluster. A Compaq Insight Manager
device using a cluster address may switch communication from one physical
device to another, which may result in erroneous information being delivered.
Consequently, Compaq Insight Manager does not allow management of a
device that uses a known cluster address.