Editing The Sp-Ii Tpu Startup File; Updating The Sp-Ii Tpu Software - Klein 3000 Series Operation And Maintenance Manual

5-14
CHAPTER 5 Splashproof-II TPU
5.6.3
The startup file for the SP-II TPU is startupCdi3000.ini.
To edit the startup file:
Connect the supplied LAN cable to the LAN connector of the SP-II TPU and
1.
to the Ethernet port of the laptop computer.
2. Turn on the laptop computer and wait for the Windows desktop to appear.
3. Turn on the SP-II TPU by switching the A/C-D/C switch to A/C for AC operation
or to D/C for DC operation.
4. Start Linux TPU Updater.
The Klein Linux TPU Updater dialog box opens.
5. Enter the SP-II TPU IP address in the Enter TPU IP Address text box if it is
different than the default address, or click
default address is 192.168.0.81. The address will already be displayed if it was
queried or changed as described in "Querying or Changing the SP-II TPU IP
Address" on page 5-12.
6. Click Edit startup.ini .
Windows Notepad opens with the contents of the startupCdi3000.ini file
displayed.
7. Make the required changes to the startupCdi3000.ini file as required, and then
exit Notepad.
Notepad exits and the changed file is saved. The SP-II TPU software restarts
and a window opens confirming the file update:
5.6.4
Updates to the SP-II TPU software are supplied as compressed archive files and
must reside on the laptop computer.
To update the SP-II TPU software:
Connect the supplied LAN cable to the LAN connector of the SP-II TPU and
1.
to the Ethernet port of the laptop computer.
Series 3000 Sonar System Operations and Maintenance Manual

Editing the SP-II TPU Startup File

Updating the SP-II TPU Software

if it is the default. The
Default Addr
11210066, Rev. 11