Optional Wireless Router; Venting The Splashproof Tpu; Figure 6-2: Splashproof Tpu Vent Closed; Figure 6-3: Splashproof Tpu Vent Open - Klein 3000 Series Operation And Maintenance Manual

6-2
CHAPTER 6 Splashproof TPU
6.1.1
The optional wireless router provides a wireless network connection to a computer
running SonarPro with a wireless Ethernet device. This wireless router is capable
of providing sufficient data bandwidth to support the data throughput of the
system. However, these wireless devices share a radio-frequency band with many
other RF devices. As a result, it is possible that RF interference from other
equipment could limit the data bandwidth of the wireless network connection and
reduce the data throughput to the computer such that it lags the rate of data
acquisition. Should this occur, you should connect the computer directly to the
Splashproof TPU using the waterproof LAN cable provided.
6.1.2
The Splashproof TPU includes
a vent which can be easily
opened or closed. The TPU is
shipped with the vent closed as
shown in Figure 6-2.
outside air temperature exceeds

30 C. Failure to do so may
damage the TPU.
To open the vent, loosen each
of the screws by hand or by
using a flat bladed screw
driver, keeping them captive to
the TPU, until the vent pops
open approximately one-half
inch as shown in Figure 6-3.
To close the vent, tighten each
of the screws until the vent is
completely closed. Hand
tightening is sufficient.
Series 3000 Sonar System Operations and Maintenance Manual

Optional Wireless Router

Venting the
Splashproof
TPU
CAUTION The vent
on the TPU must be
opened when the
Splashproof TPU Vent Closed
Figure 6-2:
Splashproof TPU Vent Open
Figure 6-3:
11210066, Rev. 11