Appendix C: General Setup, Configuration And Troubleshooting - Klein 3000 Series Operation And Maintenance Manual

APPENDIX C: G
Included in this appendix are basic setup and configuration instructions along with
other information useful for setting up and maintaining the Series 3000 Sonar
System. In addition, information is provided which can be helpful for system
troubleshooting should problems occur, including instructions on how to verify
operation of hardware components and transducers.
sonar towfish have 1500 volts. You should familiarize yourself with the location of
these voltages before you attempt any troubleshooting. Failure to observe these
warnings could result in injuries to personnel.
towfish from direct exposure to the sun prior to and during operation in high
temperature climates.
ENERAL
C
ONFIGURATION AND
T
ROUBLESHOOTING
WARNING Klein Marine Systems, Inc. recommends all troubleshooting be
done by a trained technician. Some circuits in the Sonar Transceiver and
Processing Unit have voltages as high as 240 volts, and some circuits in the
CAUTION Serious damage to the sonar electronics may occur if the sonar
towfish is operated out of the water for periods longer than 15 minutes. Let
the sonar cool 15 minutes or longer between operations. Protect the sonar
CAUTION The depth rating on the transducers is 200 meters (656 feet).
Operations at depths greater than 200 meters may damage the transducers.
S ,
ETUP
C-1