Figure B-3:
8. Enter the new address in the Enter New IP Address text box, and then click Set
TPU IP Address
A window opens confirming the change:
B.3 Editing the SP-III TPU Startup File
The startup file for the SP-III TPU is startupCdi3000.ini.
To edit the startup file:
Connect the supplied Ethernet cable to the LAN connector of the SP-III TPU
1.
and to the Ethernet port of the laptop computer.
2. Turn on the laptop computer and wait for the Windows desktop to appear.
3. Turn on the SP-III TPU by switching the A/C-D/C switch to A/C for AC
operation or to D/C for DC operation.
4. Start Linux TPU Updater.
The Klein Linux TPU Updater dialog box opens.
Editing the SP-III TPU Startup File
The Klein Linux TPU Updater Dialog Box with Current TPU IP
Address Displayed
.
B-3