Route the sub bottom and
32.
hydrophone jumper cables
through the hole in the sub
bottom transducer/
electronics assembly top
plate next to the port sub
bottom transducer as
shown. Route the tow cable
jumper cable through the
bottom plate and back
towards the aft end of the
towfish.
Slide both slots of the
33.
forward sub bottom
towfish bracket over the
shoulder bolt on the sub
bottom transducer/
electronics assembly as
shown.
Installing the Sub Bottom Profiler
Sub bottom
jumper cable
Hydrophone
jumper cable
Figure 7-22:
Hydrophone and Tow Cable Jumper Cables
Figure 7-23:
Attaching the Towfish to the Sub
Bottom Transducer/Electronics Assembly
Tow cable
jumper cable
Routing the Sub Bottom,
Shoulder bolt
7-13
Slot (2)