C.3 Editing The Tpu Startup File - Klein 5000 V2 Series Operation And Maintenance Manual

Figure C-3:
8. Enter the new address in the Enter New IP Address text box, and then click Set
TPU IP Address
A window opens confirming the change:

C.3 Editing the TPU Startup File

The startup file for the TPU is startupCdi3000.ini.
To edit the TPU startup file:
Connect the supplied Ethernet cable to the LAN connector of the TPU and to
1.
the ETHERNET connector of the SonarPro Workstation.
2. Turn on the SonarPro Workstation and wait for the Windows desktop to appear.
3. Turn on the TPU.
4. Start Linux TPU Updater.
The Klein Linux TPU Updater dialog box opens.
Editing the TPU Startup File
The Klein Linux TPU Updater Dialog Box with Current TPU IP
Address Displayed
.
C-3