Figure 5-9: The Klein Linux Tpu Updater Dialog Box With Current Tpu Ip Address - Klein 3000 Series Operation And Maintenance Manual

Configuring and Updating the SP-II TPU
Figure 5-8:
7. From the Rate drop-down list box, select the baud rate of the SP-II TPU's NAV
serial port, or select Determine Automatically to have Linux TPU Updater find
the rate.
The Klein Linux TPU Updater dialog box opens with the current IP address
displayed in the
TPU IP Address
Figure 5-9: The Klein Linux TPU Updater Dialog Box with Current TPU IP
8. Enter the new address in the Enter New IP Address text box, and then click Set
.
TPU IP Address
A window opens confirming the change:
The Select RS-232 Port Dialog Box.
text box as shown in Figure 5-9.
Address Displayed
5-13