Figure C-21: Towfish Electronics - Klein 3000 Series Operation And Maintenance Manual

2. Slide the electronics assembly gently and carefully into the housing, positioning
the extraction handle such that the "UP" label is at the top as shown in Figure
C-19 on page C-24.
3. Once properly seated unscrew the 6-mm set screws in the top and bottom of the
extraction handle to lock the feed-thru in the housing.
4. Replace the nose cone.
With the towfish electronics out of the pressure housing, you can identify some of
the components as shown in Figure C-21.
Towfish Electronics
Figure C-21:
C-25
Towfish