Klein 3000 Series Operation And Maintenance Manual page 112

7-12
CHAPTER 7 S3000SBP Chirp Sub Bottom Profiler
Using the 6-mm hex key,
30.
remove the eight M8
socket head cap screws and
washers that secure the top
shell of the sub bottom
transducer/electronics
assembly.
Turn the towfish over such
31.
that it is in its upright
position again. Set the
towfish bow next to the sub
bottom transducer/
electronics assembly as
shown. Ensure all three
jumper cables are
accessible.
Series 3000 Sonar System Operations and Maintenance Manual
M6 socket head
cap screw and
washer (8)
Removing the Top Shell of the Sub
Figure 7-20:
Bottom Transducer/Electronics Assembly
Towfish Positioned Next to the Sub
Figure 7-21:
Bottom Transducer/Electronics Assembly
11210066, Rev. 11