Klein 3000 Series Operation And Maintenance Manual page 111

Insert two of the supplied
27.
M5 socket head cap screws
through the slots on either
side of the forward sub
bottom towfish mounting
bracket, through the
hydrophone and through
the slots on the opposite
side of the bracket.
Using the 4-mm hex key
28.
and 3/4-inch adjustable
wrench, secure the bolts
with two of the supplied
M5 nylon locking nuts (not
shown).
Lay out the jumper cables,
29.
identifying each to ensure
all three are connected and
available.
Installing the Sub Bottom Profiler
M5 socket head
cap screw (2)
Hydrophone Secured—Forward
Figure 7-18:
Tow cable
jumper cable
Three Jumper Cables, Connected
Figure 7-19:
End
Hydrophone
jumper cable
Sub bottom
jumper cable
and Available
7-11