Klein 3000 Series Operation And Maintenance Manual page 104

7-4
CHAPTER 7 S3000SBP Chirp Sub Bottom Profiler
Using the 8-mm hex key,
4.
loosen the M10 socket
head cap screw on the nose
cone, and then remove the
nose cone. The screw
remains captive to the nose.
Using the Phillips screw
5.
driver, remove the two
Phillips head screws that
secure the cable cover, and
then remove the cover.
Store these components
away. They will not be
needed with the sub bottom
profiler installed.
Series 3000 Sonar System Operations and Maintenance Manual
M10 Socket
head cap screw
Removing the Nose Cone
Figure 7-4:
Phillips head
screw (2)
Removing the Cable Cover
Figure 7-5:
Nose cone
Cable cover
11210066, Rev. 11