Klein 3000 Series Operation And Maintenance Manual page 114

7-14
CHAPTER 7 S3000SBP Chirp Sub Bottom Profiler
Connect the sub bottom
34.
and hydrophone jumper
cables to the sub bottom
electronics pressure case as
shown. The dummy plug
and remaining cable are
factory connected.
Align the spar of the sub
35.
bottom transducer/
electronics assembly with
the towfish as shown.
Series 3000 Sonar System Operations and Maintenance Manual
Factory
installed
dummy
plug
Sub bottom
jumper cable
Sub Bottom and Hydrophone
Figure 7-24:
Jumper Cables Connected to the Sub Bottom
Electronics Pressure Case
Spar
Sub Bottom Transducer/
Figure 7-25:
Electronics assembly Aligned with Towfish
Sub bottom
electronics
pressure case
Factory
connected
cable
Hydrophone
jumper cable
11210066, Rev. 11