Table of Contents
Advertisement
Figure B-3:
8. Enter the new address in the Enter New IP Address text box, and then click Set
TPU IP Address
A window opens confirming the change:
B.3 Editing the SP-II TPU Startup File
The startup file for the SP-II TPU is startupCdi3000.ini.
To edit the startup file:
Connect the supplied LAN cable to the LAN connector of the SP-II TPU and
1.
to the Ethernet port of the laptop computer.
2. Turn on the laptop computer and wait for the Windows desktop to appear.
3. Turn on the SP-II TPU by switching the A/C-D/C switch to A/C for AC operation
or to D/C for DC operation.
4. Start Linux TPU Updater.
The Klein Linux TPU Updater dialog box opens.
Editing the SP-II TPU Startup File
The Klein Linux TPU Updater Dialog Box with Current TPU IP
Address Displayed
.
B-3
Advertisement
Table of Contents
